c)Do not position your body in the area where power tool will move if kickback occurs.

Kickback will propel the tool in direction opposite to the wheel’s movement at the point of snagging.

d)Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.

e)Do not attach a saw chain woodcarving blade or toothed saw blade.

Such blades create frequent kickback and loss of control.

SAFETY WARNINGS SPECIFIC FOR SANDING OPERATIONS

a)Do not use excessively oversized sanding disc paper. Follow manufacturers recommendations, when selecting sanding paper.

Larger sanding paper extending beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback.

SPECIFICATIONS

SAFETY WARNINGS SPECIFIC FOR POLISHING OPERATIONS

a)Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely. Tuck away or trim any loose attachment strings. Loose and spinning attachment strings can entangle your fingers or snag on the workpiece.

PRECAUTIONS ON USING ELECTRONIC SANDER POLISHER

1.Never mount a grinding wheel and attempt to use this tool as a disc grinder.

2.Ensure the sanding paper is securely attached by pressing firmly.

3.Never apply grinding fluid or water to the unit or material during operation.

4.Always hold the body handle and side handle of the power tool firmly

Otherwise the counterforce produced may result in inaccurate and even dangerous operation.

Voltage

240V

Power input

380 W

No load speed

7000 / min

Disc Size

150 mm

Weight (without cord, standard accessories)

2.1 kg

STANDARD ACCESSORIES

 

(1)

Sanding Pad ..............................................................

1

(2)

Sanding Paper (#120 without hole) ......................

1

(3)

Bar Wrench ................................................................

1

(4)

Side handle ...............................................................

1

(5)

Hexagon Bar Wrench ..............................................

1

(6)

Dust Collection Set ..................................................

1

Standard accessories are subject to change without

notice.

 

OPTIONAL ACCESSORIES-sold separately

(1)Dust hose (1.5 m)

(2)Sanding Paper (with hole & without hole)

(3)Sanding Paper Punch

APPLICATIONS

Finishing of reparative coating of automobiles, painted metal plates, etc.

￿Bordering between painted surfaces and metal surfaces.

￿Polishing polyester patties.

Erasing letters, figures, etc., in reparative coating of billboards.

PRIOR TO OPERATION

1.Power source

Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate.

2.Power switch

Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle while the power switch is in the ON position, the power tool will start operating immediately, which could cause a serious accident.

3.Extension cord

When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable.

4.Attaching sanding paper:

(1)As shown in Fig. 1, peel off the lining paper beginning at the slit part. Ensure that the adhesive on the back of the sanding paper does not become fouled with dust or other foreign matter.

4