Hitachi SV 12SG instruction manual Opening holes in the sanding paper with the punch plate

English

[4-3/8” ⋅ 4” (110 ⋅ 100 mm) sanding paper (Velcro type)]

(1)Match the holes in the sanding paper (Velcro type) to the holes in the sponge pad (velcro type).

Sanding paper (Velcro type)

Sponge pad

(Velcro type)

	Fig. 11
(2) Surely attach the sanding paper (Velcro	Press strongly
type) by strongly and evenly pressing with
your palm. (Fig. 12)

Fig. 12

[5” (125 mm) quick stick sanding paper]

Attach the quick stick sanding paper to the 5” (125 mm) round rubber pad in the same way as shown in ”6. Installing the sanding paper” on page 11.

3. Opening holes in the sanding paper with the punch plate

Dust collecting capacity will improve if the punch plate is used to open holes in sanding paper without holes.

Punch plate

Fig. 13

15