![](/images/new-backgrounds/1307573/30757325x1.webp)
English
HOW TO INSTALL THE OPTIONAL ACCESSORIES
WARNING: Be sure to switch power OFF and disconnect the plug to avoid accidents.
1. Installing the sponge pad (velcro type), the felt pad and the round rubber pad.
(110 ⋅ 100 mm) Quick stick pad
(110 ⋅ 100 mm) Sponge pad (Velcro type), felt pad
◯Loosen the four M4 ⋅ 10 screws and remove the quick stick pad.
5” (125 mm) round rubber pad
◯ Tighten the four M4 ⋅ 10
screws and attach the sponge pad, felt pad or round rubber pad.
Sponge pad or felt pad | Round |
| rubber pad |
Fig. 7 |
|
CAUTION: Replace only the pad and use the other parts just as they are. The sander will vibrate greatly if parts other than the pad are removed or exchanged.
13