3. Installation
3-21 . Installing the motor cover
q
w
r e
u
ty
1.Install the motor cover q to the motor back cover w with the screws e and the flat washers r.
2.Pass the motor shaft through the notch in the motor back cover w, and then tighten the screws y and the washers u so that the clearance between the motor pulley t and the motor cover q is uniform.
3-22 . Installing the spool stand
Assemble the spool stand q while referring to the spool stand instruction manual, and then install the spool stand q at the right side of the work table.
q
3-23 . Installing the eye guard
| CAUTION |
q | Attach all safety devices before using the |
| |
| sewing machine. |
| If the machine is used without these devices |
| attached, injury may result. |
|
|
Install the eye guard assy w to the face plate q with the two screws e.
w
e
20
