Brother LK3-B448E instruction manual Using the cycle sewing function Using a cycle sewing program

13. Using the cycle sewing function

Using a cycle sewing program

1.When “c1-1” is flashing in the displaywindow !0, press the foot switch to the second step.

2.Start sewing.

3.“c1-1”, “c1-2”, “c1-3” are sewn in order for each article, and when the last-recorded pattern has been sewn, the display returns to “c1-1”.

*If you press one of the DISPLAY SET switches !1when “c1-*” is displayed, you can return to the previous stitch pattern or skip a stitch pattern.

*If you press the SELECT switch e when “c1-*” is displayed, you can check the contents of the recorded user program.

Clearing a cycle sewing program

1.Switch the machine to recording mode by the procedure in step 3. of recording a user program.

2.Use one of the P* switches (user program switches) to specify which cycle sewing program to clear.

*Press the P1 switch o if you would like to clear cycle sewing program No. 1. (“Pc 1” will be displayed.)

3.Press the RESET switch !2.

*The recorded contents of the specified cycle sewing program will then be cleared.

*If you press and hold the RESET switch !2until after the buzzer has sounded twice, all cycle sewing programs will be cleared.

NOTE:

If you clear a user program after any cycle sewing programs have been recorded, all recorded cycle sewing programs will also be cleared.

60

LK3-B448E MARKII/BA-16