Brother LK3-B448E Using the cycle sewing function, Recording a cycle sewing program

13. Using the cycle sewing function

13. Using the cycle sewing function

What is the cycle sewing function?

The cycle sewing function lets you program up to four patterns for cycle sewing of patterns in a predeter mined order.

Recording a cycle sewing program

1.Set DIP switch q-3 to ON, and then record the pat- terns which you would like to use for cycle sewing. (Refer to “12-4. Using user programs”.)

*Cycle sewing cannot be performed using patterns (P1 to P16) which have not had a user program assigned.

q

2.Set the memo-03 switch to ON. (Refer to page 45 for how to do this.)

3.While pressing the TEST switch w, press the SE- LECT switch e.

* All of the menu indicators (r to i) will illuminate and the mode

will switch to recording mode.

POWER

!2

R E S E T

B430E		Series
r				o
P	PROGRAM NO.		P1	P2
t
	X-SCALE
y	Y-SCALE		P3	P4

u

4. Press the P1 switch o.

•“Pc 1” will appear in the display window!00to indi- cate that cycle sewing program No. 1 is being re- corded.

*Programs P2, P3 and P4 switches can also be used for program- ming.

w

T E S T

BOBBIN.WIND

SPEED

i

COUNTER

S E L E C T

e

!0

!1

5.Press the SELECT switch e. *The PROGRAM No. indicator r will illuminate and “1- -” will appear in the display window!0.

6.Press the DISPLAY SET switches !1to select the number for the user program that you would like to

record.

7.Press the SELECT switch e. *“2- -” will appear in the display window!0.

8.Press the DISPLAY SET switches !11to select the number for the user program that you would like to record.

9.Repeat steps 5. and 6. to record all programs which you would like to include for cycle sewing.

*After “9- -” is displayed, “A- -”, “b- -”, “c- -”, “d- -”, “E- -” and “F- -” will be displayed in that order so that up to the 15th pattern can be recorded.

*If you would like to return to a previous number during the recording procedure, press the P1 switch so that “Pc 1” is displayed, and then return to step 4.

10.Press the TEST switch w.

•This completes the setting of cycle sewing program No. 1.

*The menu indicators (r to i) will all illuminate and “c1-1” will appear in the display window!0to indicate that the cycle sewing program No.1 is currently selected.

LK3-B448E MARKII/BA-16

59