12. Using user programs
12.Using user programs
User program ...
It can store sixteen different programs which can include details such as the program number, X scale, Y scale and sewing speed. If you are sewing certain patterns over and aver again, it is useful to record the settings for these patterns into a user program.
Recording a user program
1.Turn off the power switch and then set DIP switch A- 3 of the DIP switches q to ON.
2.Turn on the power switch.
While pressing the TEST switch w, press the SE- LECT switch e.
*All of the menu indicators (r to i) will illuminate and the mode will switch to recording mode.
*In addition, “PP 1” will appear in the display windowo to indicate that user program No.1 is being recorded. (Once recording of No.1 is completed, No.2 will be displayed; once No.2 is completed, No.3 will be displayed. Thus the next unrecorded program letter is always displayed.)
!2
w
POWER
R E S E T
T E S T
BOBBIN.WIND
!1
P | PROGRAM NO. | P1 P2 |
|
P3 P4
SPEED
o
COUNTER
S E L E C T
e 
!0 q
3.Press the SELECT switch e .
*The PROGRAM NO. indicator r will illuminate.
4.Press the DISPLAY SET switches !0to select the number for the program that you would like to record.
5.Press the SELECT switch e. * The
6.Press the DISPLAY SET swithes !0to select the X scale setting that you would like to record.
7.Press the SELECT switch e. * The
8.Press the DISPLAY SET switches !0to select the Y scale setting that you would like to record.
9.Press the SELECT switch e. * The SPEED indicator u will illuminate.
10.Press the DISPLAY SET switches !0to select the speed setting that you would like to record.
11.Press the SELECT switch e. * This completes the recording of user program No.1.
*“PP 2” will then appear in the display windowo, to indicate that user program No.2 is now being recorded. Repeat steps 3. through to 11. to record further programs as desired.
12.Press the TEST switch w. This completes the recording.
*The menu indicators ( r to i ) will all illuminate and “p1” will appear in the display to indicate that user program No.1 is currently selected.
57
