Positioning

Reception may be poor when the radio is used inside a vehicle or building. When inside a building, place the radio near the window to ensure better reception.

Noise may occur if the radio is placed near an appliance that generates noise. Move the radio away from the source of the noise.

Auto Power O

The radio turns oautomatically after 8 hours.

USING THE TIMER FUNCTION

The radio turns on/oat the preset time

Use the radio as an alarm clock

Sleep Timer

Setting the sleep timer turns the radio oafter the set time

has elapsed.

 

 

 

 

1.

Pressing the sleep timer / clock button while the

 

power is turned on displays the

SLEEP

indicator.

 

The time (minutes) indicator

changes in

order of

 

[908070...10OFF] in 10-minute units each time

2.

the button is pressed.

 

 

Press the button repeatedly until the desired time is

3.

displayed.

 

 

 

 

The radio turns owhen the set time has elapsed.

4. To cancel the timer, press the sleep timer / clock button

 

until the indicator is set to OFF.

 

 

 

The

SLEEP

indicator goes oand the sleep timer is

 

cancelled.

 

 

 

 

To check the remaining time

 

 

The

SLEEP

indicator is displayed when the sleep timer

has

been set.

 

 

 

 

Press the sleep timer / clock button to check the remaining

time on the timer.

 

 

 

Buzzer Alarm / Radio Alarm

NOTE

○ The volume of the buzzer alarm cannot be adjusted. ○ If the rechargeable battery is running low, the radio

alarm timer may not work.

Charge the battery before setting the timer or use the AC adapter.

○ The radio alarm turns on in the station and at the volume selected before the timer was set. Set the volume and time to avoid creating a disturbance when the radio turns on.

When the alarm time is set and the buzzer alarm is selected, the buzzer sounds at the preset time.

When the radio alarm is selected, the radio turns on in the selected radio station at the preset time.

1. Set the time with the radio turned o.

2. Press and hold the FM mode / alarm button for more than 2 seconds to switch to alarm mode.

The ALARM indicator is displayed.

3. The “hour” indicator blinks. Turn the select dial or press the search button to select the desired “hour”.

Press the FM mode / alarm button to set the “hour”. The “minutes” indicator blinks. Turn the select dial or press the search button to select the desired “minutes”.

4. Press the FM mode / alarm button to save the set time. The ALARM indicator goes o.

5. The display changes in order of [buzzer alarmradio alarmno display] each time the FM mode / alarm button is pressed.

6. The power turns on and the buzzer sounds or the radio plays when the preset time is reached.

Buzzer Alarm

To turn othe buzzer alarm, press the FM mode / alarm button. If it is not turned o, the buzzer will continue to sound for 1 minute and then stop.

Radio Alarm

To turn othe radio, press the power button. If it is not turned o, the radio will continue to play for 30 minutes.

To check the alarm

To check the time set on the alarm, press the band selector button with the power turned o.

OTHER FUNCTIONS

Connecting an External Device

You can use the radio to listen to an MP3, MD or CD player.

1. With the radio and the external device both turned o, connect the audio cord (ø3.5 mm, available at an electric store) of the external device to the external input (AUX IN) terminal on the side of the radio.

2. Turn on the radio and press the band select button to display [AUX].

NOTE

○ The display changes in the order of [FMAMAUXFM] each time the band select button is pressed.

3. Turn on the external device to start listening.

4. Adjust the volume.

5. To disconnect the external device, turn othe device and the radio before removing the audio cord.

Using Headphones

You can use headphones or earphones purchased from an electric store to listen to the radio.

CAUTION

○ Be sure to turn the volume down before connecting the headphones or earphones.

Failure to do so may result in sudden loud noise and cause hearing impairment.

1. Connect the headphones or earphones to the headphone jack on the side of the radio.

2. No sound is emitted from the radio speakers when headphones or earphones are connected.

3. Adjust the volume.

Charging a Cell Phone

NOTE

○ When using the rechargeable battery as the power source, make sure that it is adequately charged. If the battery power is low, it may not be possible to charge the cell phone.

○ Disconnect the cell phone except when charging.

Do not make or receive calls on the cell phone in the vicinity of the radio as radio reception may be adversely aected.

○ The charging time varies depends on the type of cell phone.

○ Do not use the radio to charge devices other than a cell phone.

1. Connect a USB charging cable suitable for your cell phone (purchased from an electric store) to the charging jack on the side of the radio.

2. Turn on the radio and press the band select button to display [AUX].

NOTE

○ The display changes in the order of [FMAMAUXFM] each time the band select button is pressed.

3. Select AUX mode to start charging.

7