Hitachi UR 18DSL ●To turn the voice messages on/off, ●Inspecting the mounting screws, ●Cleaning on the outside, ●Storing the Radio, ● Service parts list

●To turn the voice messages on/off

By factory default setting, the voice message function plays “Welcome to Hitachi Power Tools” when the power is turned on and “Presented by Hitachi Power Tools” when the power is turned off.

To mute the voice messages, press memory button 1 while the power is turned off and display [OFF] on the display panel.

To restore the voice messages, press memory button 1 while the power is turned off and display [ON] on the display panel.

MAINTENANCE AND INSPECTION

WARNING

○ When not in use or during inspection and maintenance, be sure to remove the AC plug, rechargeable battery and backup batteries.

●Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately. Failure to do so could result in serious hazard.

●Cleaning on the outside

When the radio is stained, wipe with a soft dry cloth or a cloth moistened with soapy water. Do not use chloric solvents, gasoline or paint thinner, for they melt plastics.

●Storing the Radio

Do not store the radio in the following places.

○ Within reach of or easily accessible to children ○ In humid or dusty places

○ In high temperature such as inside a car or exposed to direct sunlight

○ In extremely cold places or directly exposed to cold draughts

○ Where the temperature changes drastically

○ Where it is exposed to smoke or steam such as near a cooking appliance or humidifier

● Service parts list

CAUTION

Repair, modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center.

This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance.

In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.

MODIFICATIONS

Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements.

Accordingly, some parts may be changed without prior notice.

NOTE

Due to HITACHI’s continuing program of research and development, the specifications herein are subject to change without prior notice.

8