Advanced Techniques | - 34 - |
Note: When creating a title in the CAM mode, the DATE/TITLE button of the camcorder can be used instead of the TITLE ON/OFF button on the remote control. " TITLE" should be displayed in the viewfinder at this time.
Note: Be sure to insert the clock battery before creating a title. Although a title can be created without the clock battery inserted, it will disappear when the battery providing power to the camcorder is removed.
Creating a Title1.Connect the camcorder to a power source.
2.Hold down the red button on the CAM/OFF/VIDEO switch and slide it to either CAM or VIDEO.
3.Press the TITLE ON/OFF button on the remote control and a flashing cursor appears in the viewfinder.
4.Use the STOP button to place the cursor where you wish to begin your title.
5.Use the F.FWD and REW buttons to select the first character of your title.
6.Once you've selected a character press the STOP button to set it.
7.Complete the title by repeating steps 5 and 6.
8.When you complete your title, press the TITLE ON/OFF button on the remote control to store the title in memory and remove the title graphics from the viewfinder.
Note: As long as the correct current time can be displayed, the title is held in memory.