
Advanced Techniques
pg. 37 | - 49 - |
Controlling Your TV with the Camera/Recorder's Remote Control
The remote control is designed to be compatible with many televisions, but will not work with every one made. If your TV does not respond the way it should when you program it as explained below, this remote may be incapable of operating it.
Once you have programmed the remote, you won't have to do it again until you change the batteries.
This remote control can be used with your TV as well as the camera/recorder, as long as your TV comes with a remote control. This feature comes in handy
The remote control is compatible with the fourteen makers of TVs listed below
Programming the Remote Control
lTurn the television on (any channel is okay).
lAim the camera/recorder's remote control at your TV set. Hold down the CH (
) button while you press the button corresponding to your brand of television as shown in the chart (page 42). For example, if you have an RCA television, press CH (
) and DISPLAY at the same time. If this button combination sends a signal that matches with your TV, the channel will change on the TV, and you'll know the remote is set to control the television.
lIf that button combination does not change the TV channel, go through the whole list of button combinations one by one until you find one that does change your TV channel.
Also, if your brand of TV is not listed in the chart, try all the buttons. One of them may work for you.
If the TV channel still doesn't change after going through all the button combinations listed, it is likely that you will not be able to program this remote control for your TV.
TV Brands | Press CH ( ) and This Button |
Hitachi | AVX |
Zenith | VOL ( ) |
Sony | ZOOM.(W) |
Magnavox | REW |
Sanyo | PLAY |
Gold Star 1 | F.FWD |
Toshiba AV DUB | |
Gold Star 2 | STOP |
NEC | PAUSE (START/STOP) |
|
|
49