Advanced Techniques

pg. 37

- 51 -

3.Hold down the red button on the CAMERA/OFF/VIDEO switch while sliding the switch to

VIDEO.

4.Insert a previously recorded tape in the camera/recorder.

5.Use the wireless remote control and press the PLAY button. Use the PLAY, F.FWD, and REW buttons to find the place where you want to stop dubbing. Press the PAUSE (START/STOP) button.

6.Display the linear timer counter with memory ("Using Memory," p 19). Press the COUNTER RESET button to set the linear time counter to 0:00:00M.

7.Use the REW and PLAY buttons to find where you wish to start dubbing. Press the PAUSE (START/STOP) button.

8.Press and hold the A/V DUB button while pressing the PLAY button. This places the camera/recorder in A/V DUB pause mode.

9.Press the PAUSE (START/STOP) button. The audio/video dubbing starts. When the linear time counter reaches 0:00:00M the camera/recorder stops automatically, recording only the portion of the tape that you selected.

Note: If the camera/recorder is in AV DUB pause or STILL mode for more than 5 minutes, the camera/recorder stops automatically to protect the tape.

Note: Automatic date recording is disabled during audio/video dubbing.

Note: When the audio/video dubbed portion is played back, noise may appear at the end of the dubbed portion.

Recording Television Programs

If your television or VCR has AUDIO OUT and VIDEO OUT jacks you can record television programs with your camera/recorder.

Recording TV Diagram

1.Connect the optional AV input cord to the VIDEO OUT and AUDIO OUT jacks of your television or VCR.

2.Connect the free plug to the AV IN/OUT jack of your camera/recorder.

3.Connect the camera/recorder to a power source.

4.Insert a cassette in the camera/recorder.

5.Hold down the red button on the CAMERA/OFF/VIDEO switch while sliding the switch to

CAMERA.

6.Turn your television or VCR on and tune it to the channel you wish to record from.

7.Press the Start/Stop button to start recording the program that is on the screen of the television.

8.Press the Start/Stop button again to stop recording.

51