Advanced Techniques
"16x9" is displayed in the viewfinder.
When the 16x9 button is pressed again, "16x9" disappears and the normal picture is restored.
Using the Wireless Remote Control
Use the wireless remote control to operate the camera/recorder from a distance. The PLAY, F.FWD, REW, STOP, PAUSE (START/STOP) and ZOOM buttons on the wireless remote control operate the functions of the corresponding buttons on the camera/recorder. Aim the wireless remote control at the infrared ray receiver of the camera recorder.
Using Remote Control Illustration
Note: Use the wireless remote control within the range of the infrared ray receiver of the camera/recorder shown above.
Note: The wireless remote control may not function in strong light such as direct sunlight or very bright artificial lighting.
Note: Clear a direct path from the wireless remote control to the infrared ray receiver. The wireless remote control won't work if an obstacle blocks the infrared rays.
Note: The remote control code of this camera/recorder is Hitachi code VCR2. If you have a VCR with the same code your Hitachi VCR may malfunction when you use the camera/recorder's wireless remote control.
Note: The remote control cannot be used to operate the camcorder when the microphone cap is left attached.
Creating and Recording Titles
Create titles easily and personalize your recordings while keeping a permanent visual record of what is contained on a tape. The camera/recorder can store 2 different titles in its memory. A title stored in memory can be displayed and recorded at any time. A title contains two lines of up to 16 characters per line. The camera/recorder contains 47 different characters for creating titles.
Creating a Title
1.Connect the camera/recorder to a power source.
2.Hold down the red button on the CAM/OFF/VIDEO switch and slide it to
47