Advanced Techniques

9.Continue programming as described above until you have entered up to four different segments.

10.Load a blank tape, then set the VCR to the record pause mode.

11.Point the remote control at the receiver on the VCR and press the COPY START button to start simple programmable edit.

￿ The camera/recorder automatically searches for the beginning of the first segment and starts playback. The recording VCR automatically starts recording.

￿ After recording the first segment, the camera/recorder automatically searches for the beginning of the next segment and resumes playback. The recording VCR is automatically released from the record pause mode and resumes recording.

￿ It continues recording and pausing until all the programmed segments are edited.

12.When simple programmable edit is finished the camera/recorder will enter the stop mode, and the VCR will enter the record pause mode.

Note: After the simple programmable edit is finished, the programmed data is erased. If you want to continue editing other segments, repeat steps 5 ~ 12. Note: If you make a mistake in the middle of programming or want to correct the programmed data, start again from the beginning.

Note: Most VCRs (recording machine) may be released from the record pause mode if it continues for more than five minutes.

Note: The dubbing start and end positions may slightly drift from the specified positions when certain VCRs are used.

To End Programmable Simple Edit

Press the PROGRAM button to remove the program display from the viewfinder. Then press the stop button on the recording VCR to set it to the stop mode.

Note: if the CAM/OFF/VIDEO switch of the camera/recorder is set to OFF or CAM when the recording VCR is in the record pause mode, the VCR enters the record mode.

Controlling Your TV with the Camera/Recorder's Remote

The remote control is designed to be compatible with many televisions, but will not work with every one made. If your TV does not respond the way it should when you program it as explained below, this remote may be incapable of operating it.

Once you have programmed the remote, you won't have to do it again until you change the batteries.

This remote control can be used with your TV as well as the camera/recorder, as long as your TV comes with a remote control. This feature comes in handy -- you don't have to juggle two remotes.

The remote control is compatible with the fourteen makes of TVs listed below -- but don't be alarmed if yours is not on our list. You may still be able to program the remote for your TV.

Every TV that comes with a remote control is set up to detect certain

53