Advanced Techniques | - 47 - |
VCR Brands | Press VCR SET and This |
| Button |
Hitachi | REVERSE |
Sony | PROGRAM |
Panasonic | FORWARD |
Toshiba | IN |
Mitsubishi | COPY START |
Sanyo | OUT |
Sharp |
|
NEC |
|
JVC |
|
Akai | A/V DUB |
Gold Star |
|
PHILIPS |
|
RCA | DISPLAY |
Zenith | COUNTER RESET |
Magnavox | TITLE ON/OFF |
Note: The remote control code is held in memory until it is changed or the batteries are replaced.
Note: Point the remote control straight at the VCR's infrared receiver for operation.
Note: Use the remote control indoors. When the infrared receivers of the VCR and camcorder are exposed to direct sunlight or strong artificial light, the remote control may not operate correctly.
Note: The remote control cannot be operated if there is an obstacle between the remote control and infrared receiver. Especially, be careful of this during dubbing.
Note: When the edit remote control is connected to the camcorder, the buttons marked * in the figure above perform the same operations as those of the other remote control provided.
Operation
You can select up to four different scenes or segments to be copied at one time.
Note: If sunlight or strong artificial light strikes the camcorder's infrared receiver, the editing operation may not be possible.
Programmable Edit Hookup
1.Connect the edit remote control to the camcorder, and then connect the AV stereo output cable as illustrated above.
2.Insert a recorded tape into the camcorder.
3.Set the CAM/OFF/VIDEO switch of the camcorder to VIDEO. Turn the recording VCR on and select line input.
4.Press the PROGRAM button of the remote control. The program display appears in the viewfinder.