General Maintenance | - 55 - |
The created title does not appear.
a title.
The LCD monitor does not turn on. batteries are used
supply.
the
then
camcorder.
The optional DC camera light cannot be used. the LCD monitor
•Insert the clock battery, then create a title.
•Do not remove the clock battery after creating
•It does not turn on when alkaline
to power the camcorder. Use another power
• The LCD monitor cannot be powered through
DC cord while alkaline batteries are left in the camcorder. First remove the batteries, and
connect the DC cord to power the
•When you are viewing the picture on the DC camera light cannot be used.
RECORDING TV PROGRAMS OFF THE AIR
Symptom | Check Point & Correction |
The camcorder cannot be set to the recording | • Check the |
cassette. |
|
mode, even when the Start/Stop button on the | See page 19 for details. |
camcorder is pressed. | • Set the CAM/OFF/VIDEO switch to |
CAM. | • Connect the camcorder and TV or VCR. |
| |
PLAYBACK OF | |
Symptom | Check Point & Correction | |
"PLAY" button cannot be engaged. |
| • Set the CAM/OFF/VIDEO switch to |
VIDEO. |
|
|
No picture appears on television screen when |
| • Set the television to the camcorder |
channel |
|
|
"PLAY" is pressed. (TV is connected to the |
| (3 or 4) depending upon the selected |
channel in |
|
|
camcorder by using RF output adapter.) |
| the RF channel select switch of RF output |
adapter. |
|
|
Interference on playback picture. | • When you see the playback picture on your | |
TV, |
|
|
(TV is connected to the camcorder by using RF |
| adjust fine tuning knob on television |
set to obtain |
|
|
output adapter.) |
| best picture. |
Picture bends at the top of the TV screen. |
| • TV receiver is of older type. It needs to |
be |
| modified to work properly with camcorder. |
|
| |
| • Tape is damaged. Try another cassette. | |
Color of your TV screen is too bright, too faint or | • TV set has VIR circuit. Turn it off | |
during playback. |
|
|
change. |
|
|