Press this button during stop or rewind mode, and fast-forwarding starts. " "appears in the viewfinder. Press the button during playback of tape, and the tape is played back in the forward direction approximately 3 times faster than the normal speed to confirm the recorded content.

Press "PLAY" to return to normal playback mode or press "STOP/EJECT" to stop tape movement

NOTE: You can also visually scan forward when the camcorder is in record/pause (stand-by) mode by pressing and holding this button.

"PLAY" Button

Used for playback of tape recorded in the SP mode.

NOTE: When the camcorder is in record/ pause (stand-by) mode, pressing and holding this button will play the tape at normal speed.

Click here for diagram.

"BATTERY EJECT" Lever

Releases the battery attached to the video camcorder.

Cassette Holder

Press "STOP/EJECT" in the stop mode to open the cassette holder. Be aware of the cassette direction when inserting.

NOTE: Power source must be connected to open the cassette holder.

"DC IN 9.6V" Jack

When using the AC adaptor/charger (provided) or the car battery cord (optional), connect this jack and the "DC OUTPUT" of the AC adaptor/charger or the car battery cord.

Graphics in the electronic viewfinder

1Displays the shutter speed according to the lightning condition. 2Appears when "STABLE PIX" is pressed. (only for VM-7400A)

3Displays the selected fade mode when fading in and out. (only for VM-7400A)

4"ZOOM" appears when the digital zoom is engaged.

5Displays the zoom position for several seconds when the power zoom switch is operated. 6Indicates the operating modes;

•"REC" appears during the record mode.

•"" appears during the rewind mode.

•"" appears during the fast forward mode.

•"" appears during the record/pause (stand-by) mode. 7Shows tape counter.

8Displays the remaining tape in seven steps. 9Indicates the battery condition;

•When the battery is fully charged, "" is displayed. When the battery is

very near empty, "" starts blinking. You should find an alternative power source or recharge the battery.

10Appears when the index signal is recorded automatically.

11When "REC/PAUSE" is pressed, if a cassette without its safety tab is inserted,

"TAPE" blinks for several seconds. When "REC/PAUSE" is pressed, if no cassette is inserted, "NO TAPE" blinks for several seconds.

12Indicates the date/time during the record or record/pause (stand-by) mode. You can record the time and/or date with object when recording.