VIEWFINDER BRIGHT CONTROL
Viewfinder brightness can be adjusted by turning the "BRIGHT" control. This does not affect the picture actually recorded by the camcorder.
HOW TO ATTACH THE SHOULDER STRAP
Attach the shoulder strap (provided), as illustrated.
TROUBLESHOOTING
Your camcorder is a highly sophisticated instrument. It has been carefully checked and adjusted at the factory under the most rigid quality control and inspection systems. However, should problems develop, check the following points and take necessary corrective measures.
INSERTING OR REMOVING THE CASSETTE
Symptom |
| Check Point & Correction |
Cassette holder cannot be opened when you press | * Connect the power source. | |
"STOP/EJECT". |
|
|
Cassette cannot be inserted into cassette compartment. | * Load cassette in direction indicated by arrow on | |
|
| cassette. |
|
| * Cassette window must be toward outside. |
CAMERA RECORDING |
|
|
|
| |
Symptom | Check Point & Correction | |
Picture does not appear in the viewfinder. | * Remove the lens cap. | |
| * Set "CAM/OFF/VIDEO" to "CAM" position. | |
The camcorder can not go into the | * The cassette has had the erase prevention tab removed. Stick a | |
recording mode, even when | piece of cellophane tape over the erase prevention hole or select a | |
"REC/PAUSE" is pressed. | different cassette. |
|
| * Set "CAM/OFF/VIDEO" to "CAM" position. | |
Picture is out of focus. | ||
attached. |
| |
BATTERY CONDITION