Hitachi WR 22SA HOW TO USE, CAUTION:

7.Mounting the socket (Fig.2)

Align the plunger located in the square part of the anvil with the hole in the hex. socket. Then push the plunger, and mount the hex. socket on the anvil. Check that the plunger is fully engaged in the hole. When removing the socket, reverse the sequence.

English

	Plunger
Hex. socket	Hole
	Anvil

Fig. 2

HOW TO USE

1.Operation of switch (Fig.3)

The switch in this machine functions as a motor switch and rotational direc- tion selector switch. When the switch is set to R indicated on the handle cover, the motor rotates clockwise to tighten the bolt. When the switch is set to L, the motor rotates counterclock- wise to loosen the bolt. When the switch is released, the motor stops.

Switch

Fig. 3

CAUTION:

Be sure to turn the switch OFF and wait until the motor completely stops before changing the direction of wrench revolution. Switching while the motor is rotating will result in burning the motor.

2.Tightening and loosening bolts

A hex. socket matching the bolt or nut must first be selected. Then mount the socket on the anvil, and grip the nut to be tightened with the hex. socket. Hold- ing the wrench in line with the bolt, press the power switch to impact the nut for several seconds. If the nut is only loosely fitted to the bolt, the bolt may turn with the nut, therefore preventing proper tightening. In this case, stop impact on the nut and hold the bolt head with a wrench before restarting impact, or manually tighten the bolt and nut to prevent them slipping.

11