– 19 –
CLEANING
The machine must be thoroughly cleaned at the end of each working shift or at least daily. Never use steel
wool to clean warewasher surfaces. Use only products formulated to be safe on stainless steel.
1. Push the OFF button.
2. Open the machine door.
3. Clean off the dish tables into the dishwasher.
4. Drain the machine by lifting up the drain lever (Fig. 27).
5. Thoroughly cleanse and flush the dishwasher interior.
Remove remaining soil with a soft cloth or brush and mild
cleanser. Rinse again. Do not allow food soil to accumulate
on the tank bottom.
6. Remove and empty the strainer pan and the strainer bucket.
Wash and rinse them thoroughly.
7. Clean the pump cover with a soft cloth or brush. Do not allow food soil to accumulate on the tank
bottom or to enter the drain.
8. Remove the overflow tube. Wash and rinse the overflow tube inside and out.
9. Make sure that the wash and rinse arms rotate freely and are free of any obstructions. If not,
remove arms and clear out any obstructions.
10. Remove and check wash arms and rinse nozzles (Figs. 28, 29) to make sure they are free of any
lime and solids. Refer to Maintenance, page 21.
NOTE: Do not bang wash arms or rinse arms to clean.
11. Replace all removed parts. Leave the machine door open to allow the interior to air out and dry.
Fig. 27
DRAIN LEVER
WASH ARM
HAND KNOB
RINSE ARM
WASH ARM
HAND KNOB
RINSE ARM
Fig. 28 Fig. 29