– 6 –
CORNER INSTALLATION
Before placing the dishwasher in its operating location, check machine configuration. If the machine
is being installed in a corner (Figs. 4, 5), clearances of 20 inches out from the dishwasher under the
left-hand tabling by 27 inches above the finished floor and 15 inches out from the dishwasher at the
right side by 27 inches above the finished floor must be provided for servicing. For proper installation
of a corner machine, the control and display should be positioned at the front corner for operator access
(Fig. 5).
For corner installation, rotate the rack track so the guide rail is positioned on the left side (Fig. 6). For
corner machines, remove the front door deflector (unscrew three bolts / nuts, Fig. 7).
RACK TRACK
GUIDE RAIL
FRONTDEFLECTOR
Fig. 6 Fig. 7
Fig. 4 Fig. 5
WASH TANK
DISH TABLE
DISH TABLE
CORNER OPERATION SHOWN
DISH TABLE
INNER WALL OF
WASH TANK
SEALANT
MACHINE SCREW
OR RIVET
NUT
CONTROLS MUST BE ACCESSIBLE
AT FRONT CORNER.