Bowl Lift Slideways

The slideways (Fig. 6) should be lubricated once each month. Remove the apron (secured by four thumb screws) from the front of the pedestal. Lightly coat both slideways with Lubriplate 630AA (supplied). Replace the apron and thumbscrews.

Bowl Lift Slideways

PL-40172-1

Fig. 6

TROUBLESHOOTING

SYMPTOMS

 

POSSIBLE CAUSES

 

 

 

Mixer will not start.

1.

Gear shift lever between gears (not fully engaged).

 

2. Circuit protector in open position — check fuse or

 

 

disconnect switch.

 

3.

Mixer or attachment overloaded.

 

4.

Bowl not all the way up.

 

5.

Wire Cage Assembly is not in the front-center

 

 

position.

 

 

 

SERVICE

If service is needed on this equipment, contact your local Hobart Service Office.

FORM 19104 Rev. A (8-98)

– 12 –

PRINTED IN U.S.A.

Page 12
Image 12
Hobart D340 manual Troubleshooting, Bowl Lift Slideways, Service