– 25 –
TEMPERATURE AND TIME PROGRAMMING
Temperature
1. Press to enter program mode. PROGRAM is displayed in the window.
2. Press to enter temperature mode. 000°F and TEMP are displayed in the window.
3. Press through to enter desired fry temperature. The fry temperature is displayed in the
window.
4. Press to exit the temperature mode. Press again to exit program mode completely.
Time
There are ten timers with advanced timing features on the HGC fryer for setting fry times on multiple
products.
Timers through :
1. Press and enter the program mode. PROGRAM is displayed in the window.
2. Press . The LED's on timers through are lit and SELECT PRODUCT is displayed in
the window.
3. To select a timer, press one of the lit timer numbers; CK# 00:00 and TIME are displayed in the
window.
4. Enter the desired time using keys through . The time is displayed in the window. After
entering the time, press ; SELECT PRODUCT is displayed in the window and the LED's on
timers through are lit.
5. Repeat steps 3 and 4 to program the remaining timers, or press to exit the program
completely.
Dispose (continued)
• Turn power switch off and open the drain valve.
• Discard the shortening into suitable discharge container.
• Close the drain valve and fill the vat with shortening.
• Turn power switch on.
• Enter the programming mode, select the dispose parameter and reset the actual filter count to
zero. This will also reset the actual cook count to zero.
NOTE: The dispose prompt can only be reset by resetting the actual filter count or disabling the
parameter.
NOTE: The filter prompt takes precedence over dispose.
See Daily Filtering on page 31 for more information.