Installation, Operation, and Care of
MODEL D330 MIXERS
SAVE THESE INSTRUCTIONS
GENERAL
The D330 Mixer is a medium duty 30 quart mixer which develops 11/4 horsepower and features a timer, thermal overload protection, and a #12 attachment hub as standard equipment. A variety of agitators are available for the 30 quart bowl. A special 20 quart bowl and agitators are available options.
Bowl Guard is standard equipment on all D330 models.
Programmable Timer Controller is optional on D330 models.
A variety of attachments and accessories are available for all mixers. These are described in a separate Use and Applications Handbook which is furnished with each mixer.
INSTALLATION
UNPACKING
Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine data plate.
LOCATION
Place the mixer in its operating location. There should be adequate space around the mixer for the user to operate the controls and install and remove bowls. The area above the mixer should allow the top cover to be removed for routine maintenance and servicing.
Holes are provided in the base for permanent bolting to the floor, although this is not necessary in normal installations. Four plastic plugs are supplied with the mixer to plug these holes if they are not used.
– 3 –
