CHANGING SPEEDS

The GEAR SHIFT LEVER is used to change speeds. Always stop the mixer before changing speeds. To change speeds, push the STOP button, move the gear shift lever to the desired speed, and restart the mixer by pushing the START button. NOTE: If you do not stop the mixer to change speeds, it will automatically shut itself off and you will have to restart it after changing speeds.

Mixer Speeds

Speed 1 (Low) — This speed is for heavy mixtures such as bread dough, heavy batters, and potatoes.

Speed 2 (Medium) — This speed is for light dough which must rise quickly, cake batters, mashing potatoes, and some whipping operations.

Speed 3 (High) — This is a fast speed for light work, such as whipping cream, beating eggs, and mixing thin batters.

BOWL LIFT

D330 models equipped with a Lift Lever raise the bowl by rotating the Lift Lever downward; and lower the bowl by rotating the Lift Lever upward.

MIXING

This section explains operation of the mixer and how to install bowls, agitators, and attachments. A separate Use and Applications Handbook is provided with the mixer which contains information on mixing procedures and outlines specific uses for agitators, attachments, and accessories.

Bowl

New mixer bowls and agitators (beaters, whips, and dough arms) should be thoroughly washed with hot water and a mild soap solution, rinsed with either a mild soda or vinegar solution, and thoroughly rinsed with clear water BEFORE being used. This cleaning procedure should also be followed for bowls and agitators before whipping egg whites or whole eggs.

The bowl must be installed before the agitator.

To install the bowl, fully lower the bowl support. Position the bowl so the alignment bracket on the back of the bowl is in the bowl retainer on the bowl support and the alignment pins on the front of the bowl support fit in the holes in the bowl. Lock the bowl in place by rotating the bowl clamps over the ears of the bowl.

Agitator

To install an agitator, the bowl must be installed and fully lowered. Place the agitator in the bowl, push it up on the agitator shaft, and turn it clockwise to seat the shaft pin in the slot of the agitator shank.

To Raise the Bowl While Mixing

To raise the bowl while the agitator is mixing the product (when required by recipe or when using the Bowl Scraper Attachment): Load ingredients. Close Wire Cage Assembly. Select Low speed. To begin mixing, press and hold the Start button; then raise the bowl.

– 9 –

Page 8 Page 10
Page 9
Image 9
Hobart ML - 104481 manual Changing Speeds, Bowl Lift, Mixing
Page 8 Page 10

ML - 104481 specifications

Hobart ML - 104481 is a state-of-the-art commercial cooking appliance designed specifically for the foodservice industry. Renowned for its reliability and efficiency, this cooking solution is equipped with a variety of features that cater to the demands of any fast-paced kitchen environment.

One of the standout characteristics of the Hobart ML - 104481 is its versatility. This machine can perform multiple cooking functions including boiling, steaming, and even frying, making it an ideal choice for a wide range of culinary applications. The ability to switch between different cooking methods means that chefs can optimize their workflows without needing to invest in multiple pieces of equipment.

The Hobart ML - 104481 is equipped with a powerful heating system that ensures quick heat-up times, allowing operators to prepare food dishes rapidly. This feature is particularly advantageous during peak service periods, maximizing efficiency and minimizing wait times for customers. Additionally, the unit’s precise temperature control system enables chefs to achieve consistent results across various cooking tasks, enhancing the quality of the final product.

Constructed with durable, high-quality materials, the Hobart ML - 104481 is designed to withstand the rigors of daily use in a commercial kitchen. Its stainless-steel exterior not only presents a professional appearance but also ensures easy cleaning and maintenance. Hygiene is paramount in food service, and this model facilitates compliance with health and safety standards.

Advanced technologies integrated into the Hobart ML - 104481 include programmable controls that allow operators to set and save specific cooking parameters for different recipes. This feature ensures that meals can be prepared consistently every time, reducing the risk of human error. Moreover, the intuitive control panel is designed for ease of use, allowing staff to quickly navigate through operations, which is essential in a busy kitchen environment.

In summary, Hobart ML - 104481 is a highly efficient and versatile cooking solution tailored for commercial kitchens. With its robust construction, fast heating capabilities, and advanced programmable features, this appliance not only meets but exceeds the expectations of foodservice operators. Whether used in restaurants, catering services, or institutional kitchens, the Hobart ML - 104481 stands out as a reliable partner in delivering high-quality dishes efficiently and consistently.
Top Page Image Contents