– 4 –
Installation, Operation, and Care of 10 Quart MIXERSAVE THESE INSTRUCTIONS

GENERAL

The 10 quart mixer has a DC electric motor and motor control. A 10 quart bowl, B-Flat beater, dough
hook, and D wire whip are shipped as standard equipment. A 0 - 15 minute timer and plastic foot pads
are standard.

INSTALLATION

UNPACKING
Immediately after unpacking the mixer, check for possible shipping damage. If the mixer is found to be
damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, test the electrical service to assure that it agrees with the specifi cations on the ma-
chine data plate.
LOCATION
Remove shipping bolts that attach the four legs to the base-frame of the carton.
Place the mixer on a suitable sturdy level surface. There should be adequate space around the mixer
for the user to operate the controls and install and remove bowls.
ELECTRICAL CONNECTIONS (Cord Connected Mixers)
The electrical cord on this machine is equipped with a three-pronged grounding
plug which must be connected to a properly grounded receptacle. If the receptacle is not the
proper grounding type, contact an electrician. Do not remove the grounding prong from the
plug.