Hobart ML-18887, ML-19689 manual Model, Machine Data, Oil Drain Plug

Cut the meat into chunks about the size of a fist and place in the Feed Pan. Feed meat under the guard and into the Feed Pan opening. Use the Feed Stomper to dislodge over-sized pieces or to dislodge meat which may become stuck in the Feed Pan opening or the cylinder opening. It is not necessary to force meat through the chopper.

When the product is run through the chopper a second time, more speed is attained by feeding small quantities at a time. Allow the machine to feed at its own rate.

MODEL 4732

NON-REMOVABLE

FEED PAN

FEED STOMPER

DEFLECTOR

PLATE		MACHINE DATA
	KNIFE	PLATE

JUNCTION BOX

WORM	CYLINDER
		OIL DRAIN PLUG
ADJUSTING RING		OIL-FILL PLUG
	PLUG BUTTON	START - STOP
		SWITCH KNOB

PL-56289

Fig. 3

– 5 –