– 11 –
Fig. 3
OPERATION
CONTROLS (FIG. 3)
PL-56351
OFF
START
POWER
CYCLE
2
4
6
SELECTOR
SWITCH
FILL
NOTE: Opening the door during cycles will cause cycle to start over at the beginning.
DRAIN LEVER (Fig. 4)
Drain lever is located inside the wash chamber
(middle front with door open). Lower the lever to
close the drain before beginning a timed fi ll. Rotate
lever upward to open the drain after turning the
machine off at the end of the day.
DIAL THERMOMETERS (not shown)
Thermometers indicate the Wash Tank Temperature
and the Rinse Temperature. Thermometers are
located on top of the wash chamber and are clearly
visible when the doors are shut. Minimum Wash Tank
Temperature is 150°F. Minimum Rinse Temperature
is 180°F.
SELECTOR SWITCH
OFF Electric power to machine is off. POWER and CYCLE lights are off.
FILL Timed fi ll requires about 3 minutes. Be sure Drain Lever (Fig. 4) is closed. Press
the START button to begin a timed fi ll.
SELECT WASH CYCLE and press START.
2 A 2-minute wash cycle is followed by a 5-second pause and a 24-second rinse.
4 A 4-minute wash cycle is followed by a 5-second pause and a 24-second rinse.
6 A 6-minute wash cycle is followed by a 5-second pause and a 24-second rinse.
START button Begins a timed fi ll or starts a wash cycle.
POWER light (green) Indicates the machine has power, and the Selector Switch is not off.
CYCLE light (white) Amber light indicates a timed fi ll or wash cycle is in process.
Fig. 4