SECTION 5 − OPERATION
5-1. Controls
12
OFF | POWER |
| |
| CUP |
ON | TEMP |
| |
| INPUT VOLTAGE |
1Power Switch
2Power Light
Use light to tell if unit is energized and ready to operate. Light goes off if input power is not with specified range (see trouble light infor- mation).
3
3 Trouble Light
Trouble light comes on for the following conditions:
aIf cup is removed from torch (unit power must be turned off and back on again)
|
| 196 630 |
b | If unit overheats | |
c | If | input power is not within |
specification (93 to 137 vac). If input power is outside of specified range, cycle power by placing the power switch in the off position and back on again. Check input power if problem continues.
5-2. Trigger Safety Lock
1 Trigger
Trigger Locked
1 |
|
Trigger Unlocked | 801 |
