Hobart Welding Products DP-3035 manual Installation, Specifications, Removing MIG Gun From Handler

SECTION 3 − INSTALLATION

3-1. Specifications

	Approximate	Cooling	Maximum Spool	Weld Circuit	Overall
Wire Diameter Range	Wire Feed					Weight
		Method	Size	Rating	Dimensions
	Range
.030 Thru .035 in					Length:
(0.8 Thru 0.9 mm)
				100 Volts, 150	11-1/2 in (291 mm)
Aluminum Wire
	115 To 715 ipm		4 in (102 mm)	Amperes, 60%	Width:	7.5 lb (3.4 kg)
Or Flux Cored Wire
	(4.1 To 20.4	Air Cooled		Duty Cycle	2-1/4 in (57 mm)
			Diameter			Gun With Cable
.023 Thru 035 in	mpm)			Using Argon
					Height:
				Shielding Gas
(0.6 Thru 0.9 mm)
					8 in (203 mm)
Solid Wire

3-2. Removing MIG Gun From Handler 210

Cut Off End Of Wire Open Pressure Assembly

Thumbscrew

.Hold wire tightly to keep it from unraveling.

Rewind Wire Onto Spool, Fasten	Loosen Thumbscrew, Disconnect Gun
End Of Wire To Spool	Trigger Plug, And Pull Gun From Unit

Ref. 804 686-A

OM-230 261 Page 9