Manuals / Hobart Welding Products / Power Tools / Welding System

Hobart Welding Products OM-180 670Q ARC Rays can burn eyes and skin, Flying Metal can injure eyes

Models: OM-180 670Q

1 36
Download 36 pages 4.17 Kb
Page 6
Image 6

ARC RAYS can burn eyes and skin.

Arc rays from the welding process produce intense visible and invisible (ultraviolet and infrared) rays that can burn eyes and skin. Sparks fly off from the weld.

DWear a welding helmet fitted with a proper shade of filter to protect your face and eyes when welding or watching (see ANSI Z49.1 and Z87.1 listed in Safety Standards).

DWear approved safety glasses with side shields under your helmet.

DUse protective screens or barriers to protect others from flash and glare; warn others not to watch the arc.

DWear protective clothing made from durable, flame-resistant mate- rial (leather and wool) and foot protection.

WELDING can cause fire or explosion.

Welding on closed containers, such as tanks, drums, or pipes, can cause them to blow up. Sparks can fly off from the welding arc. The flying sparks, hot workpiece, and hot equipment can cause fires and

burns. Accidental contact of electrode to metal objects can cause sparks, explosion, overheating, or fire. Check and be sure the area is safe before doing any welding.

DProtect yourself and others from flying sparks and hot metal.

DDo not weld where flying sparks can strike flammable material.

DRemove all flammables within 35 ft (10.7 m) of the welding arc. If this is not possible, tightly cover them with approved covers.

DBe alert that welding sparks and hot materials from welding can easily go through small cracks and openings to adjacent areas.

DWatch for fire, and keep a fire extinguisher nearby.

DBe aware that welding on a ceiling, floor, bulkhead, or partition can cause fire on the hidden side.

DDo not weld on closed containers such as tanks, drums, or pipes, unless they are properly prepared according to AWS F4.1 (see Safety Standards).

DConnect work cable to the work as close to the welding area as practical to prevent welding current from traveling long, possibly unknown paths and causing electric shock and fire hazards.

DDo not use welder to thaw frozen pipes.

DRemove stick electrode from holder or cut off welding wire at contact tip when not in use.

DWear oil-free protective garments such as leather gloves, heavy shirt, cuffless trousers, high shoes, and a cap.

DRemove any combustibles, such as a butane lighter or matches, from your person before doing any welding.

FLYING METAL can injure eyes.

DWelding, chipping, wire brushing, and grinding cause sparks and flying metal. As welds cool, they can throw off slag.

DWear approved safety glasses with side shields even under your welding helmet.

OM-180 670 Page 2

BUILDUP OF GAS can injure or kill.

D Shut off shielding gas supply when not in use.

D Always ventilate confined spaces or use approved air-supplied respirator.

HOT PARTS can cause severe burns.

DDo not touch hot parts bare handed.

DAllow cooling period before working on gun or

torch.

MAGNETIC FIELDS can affect pacemakers.

D Pacemaker wearers keep away.

D Wearers should consult their doctor before going near arc welding, gouging, or spot welding operations.

NOISE can damage hearing.

Noise from some processes or equipment can damage hearing.

DWear approved ear protection if noise level is high.

CYLINDERS can explode if damaged.

Shielding gas cylinders contain gas under high pressure. If damaged, a cylinder can explode. Since gas cylinders are normally part of the welding process, be sure to treat them carefully.

DProtect compressed gas cylinders from excessive heat, mechani- cal shocks, slag, open flames, sparks, and arcs.

DInstall cylinders in an upright position by securing to a stationary support or cylinder rack to prevent falling or tipping.

DKeep cylinders away from any welding or other electrical circuits.

DNever drape a welding torch over a gas cylinder.

DNever allow a welding electrode to touch any cylinder.

DNever weld on a pressurized cylinder – explosion will result.

DUse only correct shielding gas cylinders, regulators, hoses, and fit- tings designed for the specific application; maintain them and associated parts in good condition.

DTurn face away from valve outlet when opening cylinder valve.

DKeep protective cap in place over valve except when cylinder is in use or connected for use.

DRead and follow instructions on compressed gas cylinders, associated equipment, and CGA publication P-1 listed in Safety Standards.

Page 5 Page 7
Page 6
Image 6
Hobart Welding Products OM-180 670Q manual ARC Rays can burn eyes and skin, Welding can cause fire or explosion
Page 5 Page 7

OM-180 670Q specifications

The Hobart Welding Products OM-180 670Q is a versatile and reliable welding machine designed to meet the needs of both professional welders and DIY enthusiasts. Known for its user-friendly features and robust performance, the OM-180 670Q stands out in the market for its exceptional build quality and innovative technologies.

One of the main features of the OM-180 670Q is its MIG welding capability, which allows for precise and efficient welding on a variety of materials, including mild steel, stainless steel, and aluminum. This makes it suitable for a broad range of applications, from auto body repairs to light industrial work. The welding machine operates on a 230V power supply, providing the flexibility needed for both home workshops and professional environments.

The device is equipped with a smooth and adjustable wire feed speed control, enabling welders to easily fine-tune their settings for optimal bead appearance and penetration. This feature ensures that users can achieve consistent results, regardless of the specific project requirements. Additionally, the OM-180 670Q includes a dual-gauge regulator, which allows for precise monitoring of gas flow, ensuring weld quality and reducing waste.

Another notable characteristic of the OM-180 670Q is its compact and portable design. The lightweight construction, combined with a built-in handle, makes it easy for users to transport the machine to different job sites or store it away when not in use. This portability does not compromise the durability of the product; the rugged outer shell is designed to withstand the rigors of daily use.

The Hobart OM-180 670Q also incorporates technological advancements such as the Auto-Set feature, which simplifies the setup process by automatically adjusting voltage and wire feed speed based on the selected material thickness. This takes the guesswork out of welding, making it accessible for novice welders while still offering flexibility for experienced users.

Safety is another critical aspect of the OM-180 670Q. It includes built-in safety features such as thermal overload protection, which prevents overheating, and a built-in fan to maintain optimal operating temperatures. Furthermore, its simplicity in design with fewer controls means that operators can focus on their skills without being overwhelmed by complex settings.

In summary, the Hobart Welding Products OM-180 670Q is a well-rounded welding machine that combines ease of use, advanced technology, and portability. Its ability to handle various materials, along with safety and precision features, makes it an excellent choice for both beginners and seasoned welders looking for a reliable tool for their projects.