1-3. Additional Symbols For Installation, Operation, And Maintenance

FIRE OR EXPLOSION hazard.

D Do not install or place unit on, over, or near combustible surfaces.

DDo not install unit near flammables.

DDo not overload building wiring – be sure power supply system is properly sized, rated, and protected to handle this unit.

MOVING PARTS can cause injury.

DKeep away from moving parts such as fans.

DKeep all doors, panels, covers, and guards closed and securely in place.

FALLING UNIT can cause injury.

DUse lifting eye to lift unit only, NOT running gear, gas cylinders, or any other accessories.

DUse equipment of adequate capacity to lift and support unit.

DIf using lift forks to move unit, be sure forks are long enough to extend beyond opposite side of unit.

OVERUSE can cause OVERHEATING

DAllow cooling period; follow rated duty cycle.

DReduce current or reduce duty cycle before starting to weld again.

DDo not block or filter airflow to unit.

H.F. RADIATION can cause interference.

DHigh-frequency (H.F.) can interfere with radio navigation, safety services, computers, and communications equipment.

DHave only qualified persons familiar with electronic equipment perform this installation.

DThe user is responsible for having a qualified electrician prompt- ly correct any interference problem resulting from the installa- tion.

DIf notified by the FCC about interference, stop using the equipment at once.

DHave the installation regularly checked and maintained.

DKeep high-frequency source doors and panels tightly shut, keep spark gaps at correct setting, and use grounding and shielding to minimize the possibility of interference.

STATIC (ESD) can damage PC boards.

DPut on grounded wrist strap BEFORE handling boards or parts.

DUse proper static-proof bags and boxes to store, move, or ship PC boards.

MOVING PARTS can cause injury.

DKeep away from moving parts.

DKeep away from pinch points such as drive rolls.

WELDING WIRE can cause injury.

DDo not press gun trigger until instructed to do so.

DDo not point gun toward any part of the body, other people, or any metal when threading welding wire.

ARC WELDING can cause interference.

DElectromagnetic energy can interfere with sensitive electronic equipment such as computers and computer-driven equipment such as robots.

DBe sure all equipment in the welding area is electromagnetically compatible.

DTo reduce possible interference, keep weld cables as short as possible, close together, and down low, such as on the floor.

DLocate welding operation 100 meters from any sensitive elec- tronic equipment.

DBe sure this welding machine is installed and grounded according to this manual.

DIf interference still occurs, the user must take extra measures such as moving the welding machine, using shielded cables, using line filters, or shielding the work area.

1-4. Principal Safety Standards

Safety in Welding and Cutting, ANSI Standard Z49.1, from American Welding Society, 550 N.W. LeJeune Rd, Miami FL 33126

Safety and Health Standards, OSHA 29 CFR 1910, from Superinten- dent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.

Recommended Safe Practices for the Preparation for Welding and Cut- ting of Containers That Have Held Hazardous Substances, American Welding Society Standard AWS F4.1, from American Welding Society, 550 N.W. LeJeune Rd, Miami, FL 33126

National Electrical Code, NFPA Standard 70, from National Fire Protec- tion Association, Batterymarch Park, Quincy, MA 02269.

Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1, from Compressed Gas Association, 1235 Jefferson Davis Highway, Suite 501, Arlington, VA 22202.

Code for Safety in Welding and Cutting, CSA Standard W117.2, from Canadian Standards Association, Standards Sales, 178 Rexdale Boulevard, Rexdale, Ontario, Canada M9W 1R3.

Safe Practices For Occupation And Educational Eye And Face Protection, ANSI Standard Z87.1, from American National Standards Institute, 1430 Broadway, New York, NY 10018.

Cutting And Welding Processes, NFPA Standard 51B, from National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

OM-193 472 Page 3

Page 7
Image 7
Hobart Welding Products OM-193 472F manual Principal Safety Standards

OM-193 472F specifications

Hobart Welding Products OM-193 472F is a state-of-the-art welding machine designed for both professional and home-user applications. This versatile machine stands out for its impressive power and efficiency, making it an ideal choice for a wide range of welding tasks, including MIG, flux-cored, and TIG welding.

One of the main features of the OM-193 472F is its user-friendly design, which simplifies the welding process for users of all skill levels. The machine boasts a clear and intuitive control panel that allows users to easily adjust parameters such as voltage and wire feed speed. This adjustability helps to enhance weld quality and ensures that each user can achieve optimal results according to the specific materials and thicknesses being worked on.

The OM-193 472F is equipped with advanced inverter technology, which significantly improves the machine's performance and efficiency. This inverter technology reduces energy consumption while providing a stable power output, allowing for smooth and consistent arcs. Additionally, it contributes to the machine's lightweight design, making it portable and easy to transport to different job sites.

Another noteworthy characteristic of the OM-193 472F is its robust build quality. The machine is constructed with durable materials that can withstand the rigors of demanding work environments. It is designed to be reliable and long-lasting, ensuring that users can depend on it for years of trouble-free operation. Furthermore, the machine's built-in safety features, including thermal overloading protection, help to prevent damage and prolong its lifespan.

The Hobart Welding Products OM-193 472F can handle a variety of welding wire types, making it suitable for various applications from automotive repairs to metal fabrication projects. Its capability to work with both gas and gasless wire options gives users added flexibility and makes it an excellent choice for different welding environments.

In summary, the Hobart Welding Products OM-193 472F is a highly efficient welding machine that combines user-friendly features with advanced technology and robust construction. Its versatility, portability, and safety features make it a preferred option for both novice and experienced welders looking to achieve high-quality welds in a variety of applications. With this machine, users can feel confident in their ability to tackle any welding challenge they encounter.