7-6. Cleaning Or Replacing Gun Liner
Tools Needed:
Y Disconnect gun from unit.
8 mm / 10mm
Head Tube
Remove nozzle, contact tip, adapter, and gas diffuser.
8 mm
10 mm
Remove liner.
Lay gun cable out straight before installing new liner.
To Reassemble Gun:
Insert new liner.
Install wire outlet guide so that 1/8 in (3 mm) of liner sticks out. Hand tighten outlet guide, and then tighten two full turns more.
Cut liner off so that 3/4 in (19 mm)
sticks out of head tube.
Blow out gun casing.
Install gas diffuser, adapter, contact tip, and nozzle.
Ref. 804
