1-3. Additional Symbols For Installation, Operation, And Maintenance

FIRE OR EXPLOSION hazard.

D Do not install or place unit on, over, or near combustible surfaces.

DDo not install unit near flammables.

DDo not overload building wiring − be sure power supply system is properly sized, rated, and protected to handle this unit.

FALLING UNIT can cause injury.

DUse lifting eye to lift unit only, NOT running gear, gas cylinders, or any other accessories.

DUse equipment of adequate capacity to lift and support unit.

DIf using lift forks to move unit, be sure forks are long enough to extend beyond opposite side of unit.

MOVING PARTS can cause injury.

DKeep away from moving parts such as fans.

DKeep all doors, panels, covers, and guards closed and securely in place.

DHave only qualified persons remove doors, panels, covers, or guards for maintenance as necessary.

DReinstall doors, panels, covers, or guards when maintenance is finished and before re- connecting input power.

READ INSTRUCTIONS.

DRead Owner’s Manual before using or servic- ing unit.

DUse only genuine Miller/Hobart replacement parts.

OVERUSE can cause OVERHEATING

DAllow cooling period; follow rated duty cycle.

DReduce current or reduce duty cycle before starting to weld again.

DDo not block or filter airflow to unit.

STATIC (ESD) can damage PC boards.

DPut on grounded wrist strap BEFORE handling boards or parts.

DUse proper static-proof bags and boxes to store, move, or ship PC boards.

MOVING PARTS can cause injury.

DKeep away from moving parts.

DKeep away from pinch points such as drive rolls.

WELDING WIRE can cause injury.

DDo not press gun trigger until instructed to do so.

DDo not point gun toward any part of the body, other people, or any metal when threading welding wire.

H.F. RADIATION can cause interference.

DHigh-frequency (H.F.) can interfere with radio navigation, safety services, computers, and communications equipment.

DHave only qualified persons familiar with electronic equipment perform this installation.

DThe user is responsible for having a qualified electrician prompt- ly correct any interference problem resulting from the installa- tion.

DIf notified by the FCC about interference, stop using the equipment at once.

DHave the installation regularly checked and maintained.

DKeep high-frequency source doors and panels tightly shut, keep spark gaps at correct setting, and use grounding and shielding to minimize the possibility of interference.

ARC WELDING can cause interference.

DElectromagnetic energy can interfere with sensitive electronic equipment such as computers and computer-driven equipment such as robots.

DBe sure all equipment in the welding area is electromagnetically compatible.

DTo reduce possible interference, keep weld cables as short as possible, close together, and down low, such as on the floor.

DLocate welding operation 100 meters from any sensitive elec- tronic equipment.

DBe sure this welding machine is installed and grounded according to this manual.

DIf interference still occurs, the user must take extra measures such as moving the welding machine, using shielded cables, using line filters, or shielding the work area.

1-4. California Proposition 65 Warnings

YWelding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to cause birth defects and, in some cases, cancer. (California Health & Safety Code Section 25249.5 et seq.)

YBattery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

For Gasoline Engines:

YEngine exhaust contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

For Diesel Engines:

YDiesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.

OM-950 Page 3

Page 6 Page 8
Page 7
Image 7
Hobart Welding Products OM-950 manual California Proposition 65 Warnings
Page 6 Page 8

OM-950 specifications

Hobart Welding Products has been a respected name in the welding industry, providing high-quality equipment and solutions for a wide range of welding applications. One of their notable offerings is the Hobart OM-950, a powerful and versatile MIG welder designed to meet the needs of both professionals and hobbyists alike.

The Hobart OM-950 is engineered for optimal performance and user-friendly operation. This machine stands out due to its robust construction, capable of withstanding the rigors of industrial environments while remaining portable enough for at-home use. With a maximum output of 950 amps, it is well-suited for various welding jobs, from thin sheets of metal to heavier gauge materials.

One of the main features of the OM-950 is its advanced inverter technology which allows for a lightweight and compact design without sacrificing power. This technology not only enhances portability but also improves energy efficiency, resulting in lower operational costs. The machine is designed to operate on both 230V and 460V input power, making it versatile for different work settings.

Another key characteristic of the OM-950 is its impressive duty cycle. With a 60% duty cycle at 950 amps, users can engage in extended welding operations without the risk of overheating. This is particularly advantageous during long projects where consistent performance is crucial.

The OM-950 also includes a user-adjustable output range, allowing for precise control over the welding process, which is essential for achieving clean and professional results. The welder incorporates a digital display that provides real-time feedback on settings and performance, ensuring that operators can easily make necessary adjustments on the fly.

Additionally, the Hobart OM-950 features a spool gun capable of handling aluminum and other non-ferrous materials, which expands its usability across various welding applications. The machine's built-in safety features, such as thermal overload protection, further enhance its reliability and ease of use.

With its combination of power, versatility, and user-friendly features, the Hobart Welding Products OM-950 is an excellent choice for those looking for a high-performance MIG welder that can tackle diverse welding tasks efficiently and effectively. Whether for professional use or home projects, this machine delivers on quality and innovation, making it a preferred choice among welders.
Top Page Image Contents