Hobart Welding Products Plasma Cutter specifications Process, Features Benefits

PROCESS

Air Plasma Cutting and Gouging

AirForce™ 625

Portable Air Plasma Cutter

211555

Jan. 2004

Comes Complete with

ICE-40C hand-held torch with 25 ft (7.6 m) or 50 ft (15.2 m) cable

Heavy-duty work clamp with 25 ft (7.6 m) or 50 ft (15.2 m) cable

Extra consumables (3 electrodes, 3 tips and 1 air fitting)

12 ft (3.7 m) industrial power cord and plug

Applications
	Maintenance	Prototyping
	Light construction	Body shops and fabrication

MILD STEEL CUTTING CAPABILITY (Thickness to scale.)

Rated Quality Sever

	1/2 in (13 mm)		5/8 in (16 mm)		7/8 in (22 mm)
Cutting Capacity		Maximum Quality Cutting Capacity		Sever Cut Capacity
10 inches per minute (min. speed at which an operator		Good-quality cut achieved at lower speeds.		Maximum cut achieved in ideal conditions.
achieves a smooth, steady cut using a hand-held torch).

FEATURES					BENEFITS
Wind Tunnel Technology™					Prevents abrasive dust and particles from damaging internal components.
Fan-On-Demand™					Cooling system only operates when needed. In dirty or dusty environments, this feature reduces the
					amount of airborne dust/dirt pulled through the unit.
Power Factor Correction					Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands
(PFC) circuitry					operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
Enclosed gas/air filter/regulator					Provides added protection during transportation. Standard air connection on back provides easy gas or air hookup.
LVC™ line voltage compensation					Provides peak performance power under variable input voltage conditions (176 – 264 V) for steady and
					cleaner ending cuts.
Starts without high-frequency					Will not interfere with or damage controls or computers.
Compatible with engine-driven					Capable of cutting 3/8 to 5/8 in mild steel when powered by an engine-driven welder with a 240 V generator
welders					power outlet of 8 kW or more.
Hobart’s 5/3/1 Warranty					No other manufacturer offers a better warranty than Hobart does. Power source is warranted for 3 years, parts and
					labor. Original rectifier parts have a 5-yearwarranty and the ICE torches have a 1-yearparts and labor warranty.
SPECIFICATIONS		(SUBJECT TO CHANGE WITHOUT NOTICE.)						Plasma Gas
		Max. Open-	Amps Input at Rated Output, 50/60 Hz, Single-Phase							Net Weight	Ship
Rated Output		Circuit Voltage	208 V		230 V	KVA	KW	Flow/Pressure	Dimensions	with torch	Weight
40 A at 140 VDC,		260 VDC	33		30	6.9	6.7	6 CFM (170 L/min) at	H: 151⁄4 in (387 mm)	60 lb	67.5 lb
50% Duty Cycle								75 PSI (517 kPa)	W: 103⁄8 in (264 mm)	(27 kg)	(30.6 kg)
									D: 171⁄4 in (438 mm)
	Hobart Welders An Illinois Tool Works Company							Web Site	www.HobartWelders.com
	U.S. Distributor Sales			Phone 920-735-4576		FAX 800-637-2315
	Hobart Retail Sales			Phone 800-332-3281		FAX 937-332-4161
	Canadian Sales			Phone 888-489-9353		FAX 519-421-0480
	International Sales			Phone 920-735-4509		FAX 920-735-4125