Hobart Welding Products Plasma Cutter Cutting Performance, Accessories, Distributed by

CUTTING PERFORMANCE

CUT SPEED CHART

TORCH CONSUMABLES (Order from Hobart Service Parts.)

(IN/MIN)	400
	350
	300
	250
SPEED	200
	150
	100
CUT
	50
	0
	16GA	1/8	1/4	3/8	5/8
	(0.060)

MILD STEEL THICKNESS (IN)

The cutting speed curve shows the recommended maximum cutting speed capabilities of the power source and torch for the mild steel of various thickness.

Standard

Cutting

Extended

Cutting

1/8 in (3 mm)

stand-off

recommended

Drag Shield	Retaining Cup	Standard Tip	Standard	Swirl Ring	O-Ring
			Electrode
#204 323R	#192 050	#204 325R	#192 047	#192 049	#169 232
				Apply very light coating
				of silicone grease (#169 231)
		Extended	Extended	before installing.
Deflector	Retaining Cup
		35A Tip	Electrode	For extended tip use, set
#177 888	#192 050	#192 052R	#192 048
				amperage control to 35 A.

The best cut quality is achieved by cutting near the chart line. Cutting below the line (too slow) will result in excess dross.

Cutting above the line (too fast) will cause blowback and lack of penetration.

				Standard	For best gouging results,
Gouging	Gouge Shield Retaining Cup		Gouge Tip	Electrode	set machine air pressure
	#192 203	#192 050	#204 332R	#192 047	at 55 PSI.

ACCESSORIES

ICE-40C Replacement Torches				Plasma Circle-Cutting		Motor Guard Air Filter #042 306
#195 110 25 ft (7.6 m) hand-held torch				Guide	#195 981	This filter is equipped with a
#195 111 50 ft (15.2 m) hand-held torch				Cut straight lines or		mounting bracket that allows
	Full KVA Plug Kit #119 172			circles up to 12 in		installation on the top, side, or
				diameter with ease.		rear panel of most plasma cutters.
	240 VAC, 50 amp plug
						The filter is equipped with a 1/4 in NPT port to
	(NEMA 14-50P) to fit full KVA
						match the fittings on most plasma systems; it
	receptacle with a minimum
						has a rated airflow of over 45 SCFM.
	of 8 KVA generator power.
						#30A Economy Running
		Plasma Standoff Roller
						Gear and Cord Wrap
		Guide #194 883				#195 093
		Helps maintain recommended	Suction/Magnetic Pivot Base		#195 979	Economical running gear
		standoff distance to maximize	Add this to your cutting guide for convenient			with angle for easy front
		cutting performance and	attachment to all flat surfaces. The extended arm			panel access provides
		improve tip life.	accommodates holes up to 30 in diameter.			storage for gloves and tools.

*® Certified by Canadian Standards ORDERING INFORMATION AND SYSTEM CHECKLIST

NRTL/C Association to both Canadian	Power Source	Stock No.	Description	Qty. Price
and U.S. standards.
	AirForce 625	#500 493*	208/230 VAC, 50/60 Hz, w/ ICE-40C 25 ft (7.6 m) Hand-Held Torch
	UPC: #715959303507; Shipping Weight: 67.5 lb (30.6 kg); Carton Dimensions: 15 X 27-3/4 X 20-1/2 in; Pallet Qty: 6
	Note: Shipping via UPS not recommended

AirForce 625

#500 494*

208/230 VAC, 50/60 Hz, w/ ICE-40C 50 ft (15.2 m) Hand-Held Torch

UPC: #715959303514; Shipping Weight: 63 lb (28.6 kg); Carton Dimensions: 15 X 27-3/4 X 20-1/2 in; Pallet Qty: 6

Note: Shipping via UPS not recommended

Accessories
Torch Consumables		See above
Replacement Torch	#195 110	25 ft (7.6 m) ICE-40C Hand-Held Torch
	#195 111	50 ft (15.2 m) ICE-40C Hand-Held Torch
Full KVA Plug Kit	#119 172	Field
Plasma Standoff Roller Guide	#194 883
Plasma Circle-Cutting Guide	#195 981
Suction/Magnetic Pivot Base	#195 979
Motor Guard Air Filter	#042 306
Replacement Filter Element	#042 312	Box of Four
#30A Economy Running Gear	#195 093
and Cord Wrap
Date:		Total Quoted Price:

DISTRIBUTED BY:

Litho in USA