SECTION 4 − BATTERY REPLACEMENT
Model XTV: Remove the batteries by sliding the cover plate to the left. Re-
place with 2 AAA alkaline batteries. (Note: be sure the positive (+) side of the battery is aligned with positive (+) terminal.) Replace cover plate and then press On button.
Model XTP: Remove the batteries by turning the battery cover counter-
clockwise 90 degrees. Replace with Lithium battery CR2450. (Note: be sure the battery positive (+) terminal is up.) Replace the cover and then press On button.
NOTE: The XTF model has a
SECTION 5 − MAINTENANCE
Cleaning
The helmet requires little maintenance, however for best performance we recommend cleaning after use. Using a soft cloth dampened with a mild soap and water solution, wipe the cover lenses clean. Allow to air dry. Occasionally, the filter lens and sensors should be cleaned by gently wip- ing with a soft, dry cloth. (Never use solvents or abrasive cleaning de- tergents. Do not immerse the lens assembly in water).
Page 8