A SS E M B LY
I N S T R U C T I O N S
Step 2d
F R A M E A S S E M B L Y
In this step, start by pressing (29) into (2). Place a (28) over the two holes in the bottom of (2). Now slide (31) into the holes. Slide (27) and the (26) onto (31). Make sure (26) and (27) and (31) are sitting level, then fasten the top of each (31) to (2). Next attach (23) to (22). Secure (22) to (26), slide on (24) and attach another (23) to the (2). Attach bigger end of the (CL) to (22), and the other end to (25). Then Wrench tighten bolts.
Part Descriptions | Hardware Descriptions | |
2 - Weight Cage | F - | |
22 | - Center RH (BRK) Assembly | H - |
23 | - Add On Rods | J - |
24 | - 5lbs. Add On Weight | K - |
25 | - Weight Selector Pin | AE - 3/8” Flat Washer (White Zinc) |
26 | - 20lbs. Steel Weight Plate | AF - 3/8” Lock Washer (White Zinc) |
27 | - 20lbs. Intermediate Weight Plates | AG - 5/16” Flat Washer (Black Zinc) |
28 | - Weight Bumper | AH - 5/16” Lock Washer (Black Zinc) |
29 | - Guide Rod Bushing | AJ - 3/8” Split Washer (White Zinc) |
31 | - Guide Rods | AK - 3/8” Lock Washer (Black Zinc) |
|
| AL - 3/8” Flat Washer (Black Zinc) |
CD - Top Weight Roll Pin
CE - Guide Bearing (Tall)
CF - Guide Bearing (Short)
CL - Selector Pin Lanyard
Page 11
HOIST
FITNESS SYSTEMS
R
2407 Assembly
