ASSEMBLY INSTRUCTIONS
Step 1: Carefully unpack all the contents of this carton. For the HABF27: Take the two plastic feet and insert each into the two holes located on the bottom of the fan. Push the bottom of the plastic feet until they snap into the two holes.
OPERATING INSTRUCTIONS
Your fan is equipped with the technologically advanced "1Touch™ " Accutemp thermostat. This feature will automatically turn the fan "ON" or "OFF" depending on the preset comfort level. The comfort level ranges between 60° and 80°F.
•Plug the fan into a 120V AC electrical outlet
•To start the unit and run continuously, push the button once for the High setting and press the button twice for the Low setting
•To stop the unit, press and hold the button for two seconds or keep pressing the button until all the speed and temperature indicators are off.
One Touch Thermostat Instructions
To take advantage of the 1Touch™ Thermostat, continue to press the button until the desired temperature is reached. When ambient temperature drops below the set temperature, the fan will stop. When the outside temperature rises above the set point, the fan will
turn on automatically.
Air Flow Direction
To change the direction of the air flow, move the directional grill to the desired location.
CLEANING/MAINTENANCE
Follow these instructions to correctly and safely care for your 1Touch™ Box Fan. Please remember:
•Always unplug the fan before cleaning or disassembling.
•Do not allow water to drip on or into the fan motor housing.
•Do not use any of the following as a cleaner: gasoline, thinner, benzine.
Fan Blade Cleaning
Step 1: To access the fan blade, remove the six screws from the Rear Grill. Clean the fan blade, both front and rear grills with a soft cloth moistened with a mild soap solution. Do not immerse the motor in water. Also, do not operate the fan with grill(s) removed.
Note: Please be cautious around the motor housing area. Do not allow the motor or electronics to be exposed to water.
