Home Automation 38A00-3 HAI UPB Lumina Mode Controller Operation, Pushbutton Operation

HAI UPB™ LUMINA MODE CONTROLLER OPERATION

Although the HAI UPB™ Lumina Mode Controller will perform differently once it is configured by the Lumina controller, the following describes the operation of the HAI UPB™ Lumina Mode Controller in its factory default configuration.

The HAI UPB™ Lumina Mode Controller has six pushbuttons labeled AWAY, HOME, SLEEP, VAC, SPCL, and PARTY, which (by factory default) are used to control six lighting scenes. When the pushbutton labeled “AWAY” is pressed, the LED behind the “AWAY” pushbutton is illuminated and any other is turned off. When the pushbutton labeled “HOME” is pressed, the LED behind the “HOME” pushbutton is illuminated and any other is turned off. When one of the pushbuttons labeled “SLEEP”, “VAC”, “SPCL”, or “PARTY” is pressed, the LED behind the respective pushbutton is illuminated and any other is turned off. No more than one pushbutton is illuminated at a time.

Pushbutton Operation

In its factory default configuration, the “AWAY” pushbutton will brighten the UPB™ Wall Switch Dimmers to 100% at each switch’s default fade rate when pressed. When the “AWAY” pushbutton is double-tapped, the UPB™ Wall Switch Dimmers will snap to 100%. When pressed or double-tapped, the “AWAY” pushbutton will illuminate and any others are turned off. The “AWAY” pushbutton is also used to brighten the last lighting scene that was turned on. When the “AWAY” pushbutton is pressed and held down, the UPB™ Wall Switch Dimmers will slowly brighten, and then stop brightening when the “AWAY” pushbutton is released.

In its factory default configuration, the “HOME” pushbutton will fade the UPB™ Wall Switch Dimmers to 0% (off) at each switch’s default fade rate when pressed. When the “HOME” pushbutton is double-tapped, the UPB™ Wall Switch Dimmers will snap to 0%. When pressed or double-tapped, the “HOME” pushbutton will illuminate and any others are turned off. The “HOME” pushbutton is also used to dim the last lighting scene that was turned on. When the “HOME” pushbutton is pressed and held down, the UPB™ Wall Switch Dimmers will slowly dim, and then stop dimming when the “HOME” button is released.

In its factory default configuration, the “SLEEP” pushbutton will brighten the UPB™ Wall Switch Dimmers to 80% at each switch’s default fade rate when pressed or double-tapped. When pressed, the “SLEEP” pushbutton will illuminate and any others are turned off.

In its factory default configuration, the “VAC” pushbutton will brighten the UPB™ Wall Switch Dimmers to 60% at each switch’s default fade rate when pressed or double-tapped. When pressed, the “VAC” pushbutton will illuminate and any others are turned off.

In its factory default configuration, the “SPCL” pushbutton will brighten the UPB™ Wall Switch Dimmers to 40% at each switch’s default fade rate when pressed or double-tapped. When pressed, the “SPCL” pushbutton will illuminate and any others are turned off.

In its factory default configuration, the “PARTY” pushbutton will brighten the UPB™ Wall Switch Dimmers to 20% at each switch’s default fade rate when pressed or double-tapped. When pressed, the “PARTY” pushbutton will illuminate and any others are turned off.

CONFIGURING THE HAI UPB™ LUMINA MODE CONTROLLER

The HAI UPB™ Lumina Mode Controller is designed to set the mode in a Lumina system, but also has several configuration options:

Option	Factory Default	CONFIGURED AS LUMINA MODE CONTROLLER
“AWAY” Pushbutton	On Button / Link 001	Sets the Lumina mode to Away.
“HOME” Pushbutton	Off Button / Link 002	Sets the Lumina mode to Home.
“SLEEP”, “VAC”, “SPCL”,	Scene Activator / Links 003,	Sets the Lumina mode to Sleep, Vacation, Special, and Party,
and “PARTY” Pushbutton	004, 005, 006 – respectively	respectively.
“AWAY”, “HOME”, “SLEEP”,	Each LED Indicator is assigned	When the Lumina mode is changed, the LED indicator behind
“VAC”, “SPCL”, and	to its pushbutton’s Link ID	the respective pushbutton is illuminated and any other is turned
“PARTY” LED Indicators	Each LED Indicator is mutually	off.
	exclusive (only one LED is on
	at a time).
UPB Transmission Attempts	2	No change
UPB ID	NID = 255	The Lumina controller configures Network ID (NID), Unit ID
	UID = 080	(UID), Network Password, Network Name, Room Name,
		Device Name, etc.
LED Brightness	High	No change.
LED Backlighting	Enabled	No change.