Home Automation 60A00-1 HAI 15A manual For the following Models

HAI UPB™ Appliance Module

Installation and Operating Instructions

For the following Models:

60A00-1 HAI 15A Appliance Module

READ THESE INSTRUCTIONS BEFORE INSTALLING DEVICE

This HAI UPB™ Appliance Module is intended for installation in accordance with the National Electrical Code and local codes and regulations. Retain these instructions for reference.

This product is for indoor use only.

HAI UPB™ Appliance Module Overview

The HAI UPB™ Appliance Module (Figure 1) is a plug-in device that incorporates the UPB™ two-way powerline communication technology, which gives it the ability to be remotely controlled by UPB™ compatible controllers. The Appliance Module has one UPB™ controllable outlet that can sense the load’s local on/off switch (switch trigger) to turn the load on even after it was turned off using UPB™ control.

Note: The switch trigger feature is disabled by default; it may not work for all types of loads (e.g. fluorescent lighting loads).

The HAI UPB™ Appliance Module is also capable of transmitting UPB™ messages when the local load switch is used to turn the load on or off.

Each appliance module can be configured to custom fit an individual’s lifestyle and desires.

LED

Pushbutton

UPB Controlled

Outlet

Figure 1 - HAI UPB™ Appliance Module

60I00-1, Rev A