Page 9
Specifications
Zones 1-8 Power Amplifier Outputs
Continuous Average Output Power: 30W (15W x 2) Two channels driven 30-20kHz @1% THD
Rated Distortion (1/2 power): 0.40%
Rated Impedance: 6 Ohms
Damping Factor: 50+
Frequency Response (20-20kHz): ±2dB
Preamplifier Section
Variable output: 0-600mV
Impedance: 600 Ohms
Source Inputs 1-6
Input Impedance: 10K
Input Sensitivity for rated power: 300mV RMS
Input Overload: 3V RMS
Emitter Outputs
Output Drive Current: 100mA
Output Drive Voltage: 5V
System
System On: 5V @ 50mA (Ring = Ground)
Page / Mute input: Normally open (close to activate)
Power Requirements
Power Supply Input (each): 100-240VAC, 50/60Hz, 120W
Power Supply Output (each): 30VDC, 3 Amps
Power Consumption
All channels driven to full-rated power: 240W
Average operating conditions: 30W
No signal: Less than 10W
Physical Specifications
Unit Size (in enclosure): 13” W x 13” H x 4.5” D
Unit Size (on mounting plate): 13.25” W x 8.5” H x 3.75” D
Unit Weight (in enclosure): 14 lb.
Unit Weight (on mounting plate): 8 lb.