Page 4
Changing the Color of the VSC
The color of the VSC may be changed to complement the interior décor. The VSC is supplied with a
white faceplate, knob, and insert. Additional colors are available; contact your HAI distributor for more
information. Change the color of the RIM as follows:
1. Remove the faceplate. Firmly grasp the knob and pull straight outward until the knob is removed.
2. The insert attaches to the VSC with one latch on the right and one on the left. Using a small-bladed
screwdriver, gently depress the latch on one side while lifting up on the insert. Once the latches are
released on one side, remove the insert from the other side.
3. Align the latches of the new insert to the openings on the RIM and gently snap into place.
4. Insert the new knob onto the volume control shaft. Attach the new faceplate.
Setting the Zone Address
Although the Hi-Fi Main Assemble has separate RJ45 connectors for
each zone, each VSC must be configured to a specific zone address to
establish its location. This setting is made on the back of the VSC using
a rotary switch. To set the zone address, place a small screwdriver in the
slot on the rotary switch and turn it to the appropriate zone address
number 1-8
Zone 1-8
Model 62A03-1
Volume Source Control
Zone Control