INSTALLING BATTERIES
1.The battery cover is located along the side of the monitor. Remove battery cover by pressing down and pulling away from the monitor.
2.Install batteries according to the polarity indications inside the compartment (as shown in figure 2). Battery Type: 2
Alkaline LR03 (AAA) size
3.Insert the other battery, according to the polarity indications inside the compartment (as shown in figure 3).
4.Replace the cover by inserting it back into place.
1.
2.
3.
4.
Replace the batteries if:
1.The weak battery symbol appears on the display.
2.Nothing appears on the display when the power is switched on.
As the supplied batteries are for test only, they may be discharged earlier than batteries you buy in stores. Replace all batteries at one time (as simultaneous set). Use only 1.5V AAAalkaline batteries. Remove batteries when unit is not in use for extended periods of time. Date and time will need to be reset if batteries are removed or replaced. Clean contacts on battery and in battery compartment with a soft dry cloth each time you install batteries.
Note: Batteries are hazardous waste. Do not dispose of them together with the household garbage.
15 | 16 |
