HoMedics DP-300 instruction manual Changing the Colored Faceplates, Attaching Faceplate

Listening to a non-docking iPod or other portable audio devices

If you are using an iPod without a docking port, other MP3 player, or other portable audio device, you can play it through the Dock n Party via

the LINE IN jack located on the back of the unit. (Fig. 5)

1.Plug one end of the Connection Cable (included) (Fig. 1) into the head- phone or line-out jack on your audio device and the other end of the Connection Cable into the Dock n Party LINE IN jack located on the back of the unit (Fig. 5).

2.Press the POWER button on the unit to turn it on (Fig. 3).

3.Turn on and play external audio device.

4.Press the ‘+’ or ‘-’ button on the Dock n Party unit to adjust volume (Fig. 1).

Note: You may need to adjust the volume on external device too.

5.To turn unit off, press the POWER button on the back of the unit.

Note: You also need to turn off your external audio device as well.

		Connection
		Cable
LINE IN	POWER	DC IN
		iPod® Shuffle
Aux

Figure 5

8

Changing the Colored Faceplates

Attaching Faceplate

1.Choose a faceplate.

2.Gently place faceplate on top of Dock n Party unit, with two button holes placed above the ‘+’ and ‘-’ buttons.

3.(a) Press down on rear of faceplate to lock back two tabs. (b) Then press down on front of faceplate to lock front two tabs. (Fig. 6) Be sure all 4 tabs are securely locked in place.

Removing Faceplate

1.With one hand on each side of unit, firmly press up on the two front tabs of the faceplate, until the front of the faceplate is raised off unit. (Fig. 7)

2.Grasp front of faceplate, pulling up and gently loosening all four locking tabs. Be sure not to force or pull too hard, so the tabs do not break.

3.See ATTACHING FACEPLATE for directions on replacing the faceplate.

(a)
(b)
Figure 6	Figure 7
	9