2.Press and release the “SCAN” button on the side of the device. All display symbols will appear for approximately one second (Figure 1).
Figure 1
c
3.When the ear thermometer is ready, the display will next show the results from the last reading. The unit is ready for measurement at this point (Figure 2).
Figure 2 |
c |
Indicates a |
memory |
reading |
4.Press and release the “SCAN” button again with the ear thermometer outside of the ear. An arrow symbol will appear on the display (Figure 3).
5.Insert the probe tip of the ear thermometer into the ear canal within two seconds (Figure 4). It is important that the probe tip be well positioned within the ear canal. Measurement time for the actual reading is approximately one second.
Figure 4
6.A beep sound will indicate the end of the measurement. Results of the temperature measurement will be displayed (Figure 5).
Figure 5
c
Figure 3
c |
Indicates measurement in progress
10 | 11 |
