OWNER’S MANUAL
!WARNINGS
IMPORTANT: Read and under- stand all Safety Warnings on pages 2 through 4. Improper use of this chain saw can cause se- vere injury or death from fi re, elec- trical shock, body contact with moving chain, or falling wood.
•Do not overreach or cut above shoulder height.
•Keep solid footing and balance.
•Stand slightly to left side of saw. This keeps your body from being in direct line with chain.
•Do not let guide bar nose touch anything when chain is moving (see Figure 1).
Saw Maintenance and Kickback Safety
Follow maintenance instructions in this manual. Proper cleaning of saw along with chain and guide bar maintenance can reduce chances of kickback. Inspect and maintain saw after each use. This will increase the service life of your saw. Note: Even with proper sharpening, risk of kickback can increase with each sharpening.
KICKBACK
Avoid Kickback. Kickback can cause you to lose control of chain saw. Kickback can cause severe injury or death.
Kickback Safety Devices On This Saw
This saw has a Dual Raker
This saw has a chain brake. When kickback occurs, the front hand guard is moved for- ward by the back of operator’s left hand. This stops the saw chain quickly, reducing the chance of serious injury.
Never hold the chain saw by the front hand guard.
Cause Of Kickback
Kickback may occur when nose or tip of guide bar touches an object while chain is moving. If chain cutter catches on object, a sudden reverse action will result. The guide bar will kick up and back towards operator.
Kickback may also occur when wood pinches chain at guide bar nose. A sudden reverse action will also result.
The following steps will reduce the risk of kickback:
•Do not remove
•Use both hands to grip saw while saw is running. Use firm grip. Thumbs and fingers must wrap around saw handles.
•Keep all safety items in place on saw. Make sure they work properly.
Direction
Do Not Let
Guide Bar Nose
Touch Here
90° 
Quadrant
Figure 1 - Kickback Hazard Example. Do Not Let Nose of Guide Bar Touch Object While Chain is Moving
•Never try cutting through two logs at same time. Only cut one log at a time.
•Do not bury guide bar nose or try plunge cut (boring into wood using guide bar nose).
•Watch for shifting of wood or other forces that may pinch chain.
•Use extreme caution when
•Use
•Never use dull or loose chain. Keep chain sharp and tensioned correctly.
PUSHBACK AND PULL-IN
Avoid pushback and
Cause Of Pushback and
Pushback may occur while cutting with top of guide bar. Pushback will force saw back towards you.
The following steps will reduce the risk of pushback or
•Use both hands to grip saw while saw is running. Use firm grip. Thumbs and fingers must wrap around saw handles.
•Do not overreach or cut above shoulder height.
•Keep solid footing and balance.
•Stand slightly to left side of saw. This keeps your body from being in direct line with chain.
•Have saw running at full speed before starting a cut.
•When cutting, make sure spike of saw is against wood
•Never try cutting through two logs at same time. Only cut one log at a time.
•Watch for shifting of log or other forces that may pinch chain.
•Use extreme caution when
•Do not twist saw when removing guide bar from undercut.
•Use wedges made of plastic, wood, or light alloy (never steel or iron) to hold
cut open. | Continued |
101473 | 3 |
