operation

WARNING:

NEVER change nozzles without locking the lock out on the trigger handle and never point the wand at your face or at others. The quick-connect feature contains small springs that could eject the nozzle with some force. Failure to heed this may cause personal injury.

Using the quick-connect collar, changing nozzles is easy.

Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.

To connect a nozzle to the trigger handle:

Engage the lock out on the trigger handle by pulling up on the lock out until it clicks into the slot.

Push the nozzle into the quick-connect collar until it clicks in place and is secured properly.

To disconnect a nozzle from the trigger handle once the cleaning job is complete:

Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.

Engage the lock out on the trigger handle by pushing up on the lock out until it clicks into the slot.

Remove the nozzle by placing hand over nozzle then pulling back the quick-connect collar. Place nozzle in the nozzle storage area on the top of the machine.

washing with detergent

See Figure 16.

Use only detergents designed for pressure washers; house- hold detergents, acids, alkalines, bleaches, solvents, flam- mable material, or industrial grade solutions can damage the pump. Many detergents may require mixing prior to use. Prepare cleaning solution as instructed on the solution bottle.

Remove the cap from the detergent container. Place the injection hose with filter in the bottle, the filter end should rest at the bottom of the bottle.

Install a nozzle on the spray wand.

Spray the detergent on a dry surface using long, even, overlapping strokes. To prevent streaking, do not allow detergent to dry on the surface.

Before shutting off the engine:

Place the injection hose in a bucket of clean water.

Flush for 1 - 2 minutes (spray clear water through the spray wand).

Shut off the engine.

NOTE: Shutting OFF ( O ) the engine will not relieve pressure in the system. Pull trigger to release water pressure.

rinsing with the pressure washer

Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.

Engage the lock out on the trigger handle by pushing up on the lock out until it clicks into the slot.

Remove the nozzle by placing hand over nozzle then pulling back the quick-connect collar. Place nozzle in the nozzle storage area on the top of the machine.

Select the right nozzle for the job:

•Use medium pressure nozzle (green) for items such as a car or boat.

•Use higher pressure nozzle for jobs such as stripping paint and degreasing the driveway. When using these nozzles, test a small area first to avoid surface damage.

Start at the top of the area to be rinsed and work down, overlapping the strokes.

MOVING the pressure washer

See Figure 17.

NOTE: Never lift or carry this product using the moving handle.

Turn the pressure washer off.

Tilt the machine toward you until it balances on the wheels then roll the machine to the desired position.

Page 11 — English

Page 14 Page 16
Page 15
Image 15
Homelite HLCA80710 manuel dutilisation Washing with detergent, Rinsing with the pressure washer, Moving the pressure washer
Page 14 Page 16

HLCA80710 specifications

The Homelite HLCA80710 is a versatile and powerful string trimmer designed to tackle various landscaping challenges. As part of Homelite's commitment to innovation and performance, this tool is engineered for both efficiency and ease of use, making it an ideal choice for homeowners and professional landscapers alike.

One of the standout features of the HLCA80710 is its lightweight design. Weighing significantly less than traditional gas-powered trimmers, this model allows for extended use without causing the user to fatigue. The ergonomically designed handle provides a comfortable grip, enhancing maneuverability and reducing strain on the arms and back during prolonged operation.

Equipped with a robust electric motor, the HLCA80710 delivers consistent power that makes cutting through tough grass and weeds a breeze. This motor operates quietly, making it an excellent choice for residential areas where noise restrictions may apply. Additionally, its electric power source eliminates the need for gas, reducing your carbon footprint and making it an environmentally friendly option.

The trimmer features an automatic feed spool, which allows for continuous line feeding without the need for manual adjustments. This not only saves time but also ensures that you maintain optimal cutting efficiency. The dual-line cutting system is another highlight, providing a wider cutting path that enhances productivity. The ability to cut through dense underbrush with ease makes this tool invaluable for garden maintenance.

Furthermore, the HLCA80710 comes with adjustable cutting heights, allowing users to customize their trimming depth based on the landscape's needs. This adaptability ensures that you can tackle everything from delicate flower beds to rugged overgrown areas without damaging plants or soil.

In terms of maintenance, the Homelite HLCA80710 stands out with its minimal upkeep requirements. The electric motor does not require oil changes, fuel mixing, or spark plug replacements, making it a hassle-free option for users who prefer convenience.

Overall, the Homelite HLCA80710 combines powerful performance, user-friendly features, and eco-conscious design. With its various technologies and characteristics, this string trimmer is set to meet the needs of any user, making lawn care and maintenance an efficient and enjoyable task. Whether you are a casual gardener or a professional landscaper, the HLCA80710 proves to be an essential tool for maintaining any outdoor space.
Top Page Image Contents