operation

STARTING AND STOPPING

See Figures 4 - 6.

Starting the product differs depending on whether the engine is cold or warm. Blower should be on a flat, bare surface for starting.

TO START A COLD ENGINE:

Place the throttle/stop lever in the high speed ( ) position.

Slowly press the primer bulb seven (7) times.

Rotate the choke dial clockwise to the FULL CHOKE position.

Pull the starter grip sharply until engine attempts to run (no more than 4 pulls).

Rotate the choke dial to the counterclockwise HALF CHOKE position.

Pull the starter grip sharply until the engine runs.

Allow the engine to run for 10 seconds.

Rotate the choke dial counterclockwise to the RUN ­position.

Turn throttle/stop lever to desired speed.

NOTE: Move the throttle/stop lever to the () position to run the blower at high speed. Move the throttle/stop lever to the () position to run the blower at low speed. Blower speed decreases as the switch is moved closer to the low speed position and increases when the switch is moved closer to the high speed position.

TO START A WARM ENGINE:

Rotate the choke dial counterclockwise to the RUN ­position.

Place the throttle/stop lever in the high speed ( ) position.

Slowly press the primer bulb seven (7) times.

Pull the starter grip sharply until the engine runs.

TO STOP THE ENGINE:

See Figure 6.

Place the throttle/stop lever in the STOP (OFF) position.

if assistance is required STARTING THIS product:

Do not return this product to the retail store where it was purchased. Please call our Customer Service Department for any issues you may have.

For Help Call: 1-800-242-4672

WARNING:

Keep away from all hot surfaces of the blower. Failure to do so could result in possible serious personal injury.

choke

dial

PRIMER BULB

Fig. 4

run

THROTTLE/ STOP LEVER

half

CHOKE

full

CHOKE

Fig. 5

HIGH SPEED

LOW

SPEED

STOP (OFF)

 

POSITION

Fig. 6

 

Page 10

Page 9 Page 11
Page 10
Image 10
Homelite UT08520 Starting and Stopping, To Stop the Engine, If assistance is required Starting this product, See Figures 4
Page 9 Page 11

UT08520 specifications

The Homelite UT08520 is a versatile, user-friendly chainsaw designed for homeowners and light-duty professionals. Known for its reliability and performance, the UT08520 incorporates several advanced features and technologies that cater to various cutting tasks, making it an essential tool for yard maintenance, tree trimming, and firewood preparation.

One of the standout features of the Homelite UT08520 is its powerful 8-amp electric motor, which provides sufficient power for cutting through branches and logs with ease. This electric motor eliminates the need for gasoline, making the chainsaw environmentally friendly and reducing the maintenance required with gas-powered models. The electric design also ensures quieter operation, which is particularly beneficial in residential areas.

The chainsaw has a 14-inch cutting bar that strikes a balance between maneuverability and cutting capacity. This length is ideal for most trimming and pruning jobs around the yard, allowing users to reach higher branches without sacrificing control. A lightweight design further enhances the user experience, making it easy to handle for extended periods without fatigue.

Safety is a key consideration in the design of the UT08520. It comes equipped with a chain brake, which promptly stops the chain in case of kickback, reducing the risk of injury. The chainsaw also features a protective sheath for the bar and chain during storage, ensuring that the components remain secure and well-protected.

Another notable aspect of this chainsaw is its tool-less chain tensioning system. This innovation enables users to adjust the chain tension quickly and easily, ensuring optimal cutting performance without the need for additional tools. Moreover, the transparent oil reservoir allows for easy monitoring of the oil level, which is crucial for maintaining chain lubrication and prolonging the life of the chainsaw.

Overall, the Homelite UT08520 is a highly effective chainsaw, combining power, safety, and ease of use in a compact design. Ideal for homeowners seeking a reliable tool for occasional use, it delivers performance and features typically found in more expensive models, making it a popular choice within its category. With its efficient electric motor and thoughtful design elements, the UT08520 is an excellent investment for anyone looking to enhance their outdoor maintenance toolkit.
Top Page Image Contents