assembly
WARNING:
Stop the engine and disconnect the spark plug wire before installing parts, making adjustments, cleaning, or when not in use. Failure to do so could result in possible serious personal injury.
ASSEMBLING THE BLOWER TUBE
See Figure 2.
Align the flat side of the blower tube with the flat side of the blower.
NOTE: Homelite logo will be face up.
Push blower tube into blower housing until the tube latch snaps into place.
To remove the tube, lift the tube latch with a screwdriver and remove tube from the blower housing outlet.
Attaching the handle
See Figure 3.
Position handle so that the screw hole is facing outward.
Insert handle into blower handle compartment until the handle snaps into place.
Secure handle in place with the provided screw.
snap
blower tube
Fig. 2
handle
screw hole
screw
Page
snap
Fig. 3
